Absolutely! The left hand 12 x 2 self adjusting brake assembly is part # AKEBRK-7L-SA. If you need mounting hardware we offer it as part # BRKH12S. view full answer...
While Aries used to offer front floor mats for the 2017-2019 Ford-F-250, they do not yet offer the front mat custom-design for the 2020 Ford-F250 and only have the rear mats available at this time # AAFR10821809.
We have other compatible front floor mats for your 2020 Ford F-250 Super Duty with Front Bucket Seats. One premium option is WeatherTech Floor Mats # WT4410121. I actually have these in my own vehicle and I appreciate their custom-fit design since I tend to track mud and snow... view full answer...
I do have a solution for you to protect the 18K Autosliding Hitch like part # DM8550034 from Demco but unfortunately there are no covers that will fit over the entire hitch, just the part # DM14844 that fits over the head unit.
We have a wide variety of tonneau covers that you can install on your pickup to help protect your Hijacker from the elements. If your pickup is the 2018 Ford F-250 then I recommend going with the BAK Revolver X2 # BAK39330 or the RetraxONE MX # RT60383. Both are... view full answer...
Yes; there are a number of kits available for your 2020 Ford F-250 Super Duty truck with a lift kit. I recommend using the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL26KV because the internal jounce bumpers help improve ride comfort, reduce sway, and help with cornering even at lower air pressure. I also really like that Air Lift has a brand exclusive upper and lower roll plate to help protect air springs from damage and ultimately... view full answer...
We only have one 11 foot long awning with the Solera XL 12 volt power RV awning part # LCV000334909-362243. The 12 volt awnings like this one are designed to be powered by the RV's batteries. We do not have any 18 volt setups in this size. view full answer...
For a fifth wheel rail kit for your 2018 Ford F-250 short bed truck the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit # DM8552031-71 would be what you'd want.
It provides you with industry standard rails that nearly all hitches are designed to work with and is a custom install kit which means it will install without frame drilling and in much less time. view full answer...
I have another option for you, but the Camco RV Vinyl Trim Insert # CAM25202 is not for windows, entry doors, compartment doors, or vents.
We have a few window weather strips available which I have listed below so you can see what size works for you.
-Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 1/2" Tall # SR43FR
-Rubber Window Edge Weather Strip for RVs - Press In - 20' Long x 3/4" Tall # SR63FR
-Rubber Outer Window Weather Strip for RVs - Press In - 15' x 5/8"... view full answer...
Although there are no 5 puck mounting systems available as of May 2018, we do have some underbed systems for your 2017 Ford F-250 Super Duty with a 6-3/4' bed.
If the option to tow a gooseneck or 5th wheel trailer with a single underbed system is what you are looking for then the B&W Gooseneck Hitch # BWGNRK1116-5W is what you're needing. This system gives you a gooseneck hitch and hitch ball that is compatible with the B&W Companion Slider # BWRVK3400-5W which allows you to tow a 5th... view full answer...
While we do not carry the Pullrite Superlite 20k 5th-wheel hitches, we do have some great B&W Companion models that provide you with a 20k capacity you need. For that route, I recommend these options depending on what setup you have on your 2022 Ford F-250 Super Duty:
- B&W Companion 20k # BWRVK3400-5W with Installation Kit # BWGNRK1116-5W (for 6-3/4' bed without OEM prep)
- B&W Companion 20k # BWRVK3500-5W with Installation Kit # BWGNRK1116-5W (for 8' bed without OEM prep)
- B&W Companion... view full answer...
Reese offers the # RP30156 Underbed Rail Adapter that's exactly what you'll need so you can continue using your existing Reese 5th wheel hitch. The adapter will drop into the existing pucks (a small height adjustment to the adapter might be needed) and then lock into place. You'd then attach your Reese Hitch to the adapter, just like you would to regular bed mounted fifth wheel mounting rails. If you'll watch the included video, you can see how the adapter works.
If you don't already have... view full answer...
We have both of the parts you are looking for. Part # UF21-001095 for the pair of the Ultra Fab XL Super Grip Chocks and part # UF21-001094 for the single chock. view full answer...
For your 2020 Ford F-250 with the factory prep package, the Curt A16 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package, part # C16520-16020 would be the correct one.
The height on the Curt A16 is adjustable from 17 to 21 inches (measured from top of the pickup bed floor to the top of the hitch skid plate). The fifth-wheel trailer hitch's height setting is taken by measuring from the ground to the king pin, then from the ground to your truck bed. Then subtract the second measurement... view full answer...
We do have the Bulldog 2-Speed Jack # BD183401 without a spring return. This is a 10,000lb lift capacity 2-speed jack similar to the etrailer # TJD2SP-12000SP-F jack you found. The Bulldog requires a separate Handle # BD701466 as one is not included. We currently do not have drill adapters for these larger jacks as they require more power than a drill can provide under load. view full answer...
We have several 3-inch lunette ring (pintle eye) couplers that are shown on the linked page. These are offered with and without a channel mount, such as # T1812800 and # T1613700, respectively.
I went to our warehouse and measured the hole size and spacing on part # T1613700. Each hole is indeed 5/8-inch diameter and their centers are spaced apart by 2-inches. view full answer...
I checked with WeatherTech and the WeatherTech # WT50271 is a confirmed fit on your 2020 Ford F-250 SuperDuty. This bug deflector will mount into the existing holes on the hood of your vehicle and is the product you were looking for, but has only recently been confirmed as a fit on the 2020 models of the F-250.
Since you're also looking for mud flaps, the WeatherTech # WT110065-120065 are a great option for F-250 without the fender flare add ons. If you have the factory add on fender... view full answer...
The Reese Goose Box is not currently an available upgrade/change to the Rhino Box pin box. We do however have the Trailair Flex Air 5th Wheel Pin Box, # LC65VR that is. The internal air bag and built-in shock work together to cushion your ride, improve handling, and limit strain on both your truck and your trailer. But what sets the Flex Air apart from other air ride pin boxes is the addition of a pivoting head. This head, along with its built-in rubber compound, provides additional cushion,... view full answer...
It sounds like you would like to install the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1111-5W on your 2016 F-250 short bed to use a B&W Companion. The reason you are seeing the # BWRVK3400-5W is because you have the 6-3/4 bed. This is typically what is recommended to ensure that you have enough clearance with turning on the short bed model.
Assuming you have a tapered nose on your 5th wheel that allows for short bed clearance, or a pivoting pin... view full answer...
We do have the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE58QJ which is similar to their JackRabbit Retractable Hard Tonneau Cover # PE59QJ. Both will fit your 2022 Ford F-250 with the 8' long bed. The main difference besides being powered is the Bedlocker uses aluminum slats while the slats on the JackRabbit are covered in Vinyl. This will reduce the chances of the top being damaged on the Bedlocker. view full answer...
The shank parts of weight distribution systems are standardized so you can use any brand of 2-1/2-inch shank that has the height rise or drop and the weight rating you require. The linked article will help you confirm the rise or drop you need.
On the linked page you'll see standard 2-1/2-inch shanks like Curt # C17132 and Reese # RP54977 as well as cushioned types like the USA-made Gen-Y Torsion Weight Distribution Shank # 325-GH-1102. This 6-1/2-inch rise or drop shank features rubber... view full answer...
Currently the only reducer with a 3/4" hitch pin hole is the 3" to 2" Reducer # 38735. This is due to the Reese Super Titan being the only receiver which uses the 3/4" hitch pin hole. All other 3" and 2-1/2" receivers use the more common 5/8" hitch pin. And at this time Reese does not have one for a 3" to 2-1/2". view full answer...
Go To Results